Stamped concrete services in Mesquite TX - the look of stone on a solid base
Tired of a plain gray patio or walk? We pour, color, stamp and seal concrete that looks like stone, brick or wood.
- Fully licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
What goes into stamped concrete, from the base to the sealer?
Stamped concrete is poured concrete that's colored, pressed with rubber mats while it's still soft, then sealed. In Mesquite, TX we use it to give patios, walks and driveways the look of stone, brick, wood or tile. It needs the same groundwork as any slab, so we dig out, pack the base and set forms and steel first, and the sealer waits until the slab has cured enough.
Most calls I get about stamped concrete come from people with a plain gray patio or walk they're tired of looking at, or from people planning something new that they want to look like more than a slab. Frontier Mesquite Concrete Company is based in Mesquite and works in the cities around it. On every job, the price moves with the size of the area, how detailed the pattern is and which color and sealer you pick. The schedule turns on getting the base, forms and steel ready before the truck comes, then waiting out the cure before sealing. If you're starting from bare ground, it's the same job as a new concrete patio with color and a pattern added, and the written estimate I send after walking your job shows what's in the price and what isn't.
How do you know your patio or walk needs stamped concrete work?
Cracks running through it
A crack across a patio or walk usually means the ground under it settled, or there were no joints to guide where it would break. Stamping a new surface over it doesn't fix the cause, and the longer water gets in, the wider the crack gets.
One side sinking or tipping
A slab that drops at one edge or tilts toward the house usually sat on dirt that was raked level instead of packed. Every hard rain sends more water where it shouldn't go, so the problem grows the longer it sits.
Color gone dull or chalky
On an older stamped surface, a flat, washed-out look usually means the sealer has worn thin. Left alone, weather and foot traffic start wearing on the color itself, which is harder to bring back than a reseal.
Often poured alongside stamped concrete
Concrete sidewalk building
If the walk to your front door is cracked or heaving, pouring a new one at the same time lets the walkway and stamped patio match up.
Garage floor concrete
A garage slab usually wants a plain, hard-wearing surface, so if yours is cracked, stained or uneven, it's often worth redoing while the crew is already here.
How we build stamped concrete
I start with the ground, because stamped concrete is still flatwork, which is any flat poured concrete, and the pattern only lasts as long as what's under it. Our crew digs out and packs the subgrade, the soil the slab sits on. Then we set forms and rebar, the steel bars that hold the slab together, sized for how you'll use it. A Dallas cost guide points out that clay soil can call for extra grading or reinforcement so the ground doesn't shift and crack the concrete, so I look at that before I write anything down. Then we pour, put the color in, press the mats while the concrete is soft and cut control joints, shallow cuts that give the slab a planned place to crack. After that it cures, the slow hardening that sets its strength, before any sealer goes on. The big choices are how the color goes in and which sealer you want, and I lay out the tradeoffs so you know what you're picking. If the budget's tight, I'd rather you go simpler on the pattern than cut back on the base, because nobody sees the base on day one, and it's what decides whether the pattern stays flat.
Stamped work often comes up alongside other flatwork. If the path from the driveway is in rough shape, we can do concrete sidewalk building on the same schedule. And when the garage slab needs work too, garage floor concrete gets a plain finish built to take cars and tools.
Integral color
The pigment runs through the whole depth of the slab, so a chip or saw cut shows the same color as the top. It suits a patio or walk you want to age without pale scars, as long as you don't need the deepest or brightest tones.
Color hardener
It's spread on the fresh surface and worked in, which gives a harder top, so it's the usual pick for driveways and anything that takes traffic. The color lives only in that top layer, so deep damage shows gray concrete underneath.
Film-forming sealer
This is the sealer most stamped concrete gets, because it brings the color up and gives it depth. It suits you if the look matters most.
Penetrating sealer
It soaks in and protects against water and stains, but most of them leave the color as it is. It suits a spot where you'd rather have that protection than a richer color.
Get a written estimate for your stamped concrete
We reply within one business day, then I come out, walk the job with you and send a free written estimate with no obligation. Rather talk? Call (214) 429-3296.
Call (214) 429-3296Why Mesquite homeowners call Frontier Mesquite Concrete Company for stamped concrete
The owner walks every estimate
I come out myself, measure, ask how you'll use the space and write the estimate. The person you go over color and sealer with is the one running your pour day.
Prep finished before the truck
I started this business in Mesquite in 2023 after years of building the daily schedule for a busy concrete company, and we're known for having the ground, forms and steel ready before the truck pulls up. Stamping only works while the concrete is soft, so a crew still setting forms when the truck arrives can cost you the pattern.
Licensed and insured for Mesquite permits
We're fully licensed and insured. That counts in Mesquite, where the city requires a professional license before a building permit can be pulled, and its online permits are open only to licensed contractors or to owners who live in the home and claim it as their homestead.
On stamped concrete, pour day is what counts, because the pattern goes in while the concrete is soft and there's no second try. Request an estimate and I'll come look at your space.
What happens after you call about stamped concrete in Mesquite?
Call or send a request
Call (214) 429-3296 or use the form and tell us what you're picturing. We set a time for me to come out.
I walk the job with you
I measure, ask how you'll use the concrete and tell you plainly what I'd do, color and sealer included. Then I send a written estimate that shows what's in it and what isn't, so you know what you're paying for before you sign.
We set the date and permits
Once you say go, I set the date, line up materials and check with the city or county on what the job needs, and when a permit is required, we handle it. In Mesquite, any work that needs a permit also gets inspected against the codes and the approved plans, so I build the inspection into the schedule.
Pour, stamp, cure and seal
I book the truck only when the base, forms and steel are done, then run pour day while our crew colors, stamps and cuts the joints. The sealer goes on once the slab has cured enough, and before we leave I go over how to care for it.
Common questions
How much does stamped concrete cost around Mesquite?
A Dallas cost guide puts stamped concrete in the Dallas area at about $8 to $28 per square foot installed. That's the market's range, not a quote, and where your job lands depends on its size, how detailed the design is and local labor rates. My written estimate gives you the number for your slab and shows what it covers.
How often does stamped concrete need resealing?
There's no set schedule, so you reseal when the surface needs it. That's when water and stains stop beading off or the color loses its depth. Plan on doing it now and then, and I'll show you what those signs look like on your own slab.
How long does new stamped concrete need to cure before it's sealed?
New stamped concrete has to be fully cured, or cured to a certain point, before the sealer goes on. Full cure is usually counted as 28 days, but the right wait depends on where you are, the time of year and the sealer being used. I'll tell you which sealer we plan to use and when it goes on.
What causes stamped concrete to crack?
Most cracks start below the surface, with a base that was raked level instead of dug out and packed, water running under the slab, or joints that were cut late or skipped. That's why we spend our time on the base, check where the water runs and cut control joints, so that if the slab does crack, it cracks along a line we chose instead of across the pattern.
Who do I call about permits for stamped concrete in Mesquite?
Call the city's Building Inspection Division at 972-216-6212. They answer questions about required permits, inspections and the codes the city follows. Give them your address and what you're planning, and they can tell you what applies to your job.
How do I make sure stamped concrete color comes out even?
Ask the crew how they spread the color before you hire them. With color hardener, the spreading and working-in has to be even or the color comes out blotchy. On our jobs I run pour day and watch that step myself.
Get a price on your stamped concrete
Call (214) 429-3296 or send the form with the rough size of the area and a pattern or color you like, and I'll come out already knowing what you have in mind.