Concrete Cutting in Mesquite TX - Clean Openings Right Where Your Project Needs Them
Need a doorway, a pipe trench or a section of driveway out? We cut straight lines and round holes, and tell you exactly what's included.
- Fully licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
What goes into concrete cutting for a slab, driveway or wall?
Concrete cutting is how we open up a slab, driveway, sidewalk or wall in Mesquite, TX. We use a saw for straight lines and rectangular openings and a diamond core drill for round holes for pipes, drains and conduit. Frontier Mesquite Concrete Company is based in Mesquite and works in the cities around it, and cutting is often the first step before a plumbing repair or a section of new concrete.
Most people call us because one piece of concrete has to change and the rest should stay put. The price moves with the cut itself, since thicker slabs, slabs with steel rebar inside them and walls all cost more per foot, and on a small job the charge for bringing out the crew and saw can be most of the bill. The schedule turns on the prep, mainly whether we scan the slab first and what the city or county over your property wants, and we check that with them before we set a date and handle any permit the job needs. I'll give you your own number in a written estimate that shows what's in it and what isn't.
How do you know a slab or wall needs to be cut?
One section has sunk
A single driveway or patio panel that has dropped, tilted or broken up usually means the dirt under that piece washed out or settled. Cutting along clean lines lets that section come out by itself, and leaving it lets water keep running under the panels next to it.
A leak under the floor
Wet spots, a slow drain or a plumber telling you the pipe runs under the slab means someone has to get through the concrete. The longer a leak runs, the more it softens the ground the slab sits on, so the opening is worth making soon.
A wall in the way
A new door, vent or pipe through a concrete wall needs a clean opening, because breaking it out with a hammer usually cracks past the line you wanted. That leaves more to patch, and patches in a wall rarely look right.
Work that often follows a cut
Concrete driveway building
If a cracked or sunken driveway section comes out, the gap needs new concrete on a packed base that matches the slab around it.
Concrete patio construction
Cutting back an old patio edge is often how a yard gets space for a larger patio, laid out to fit how you use it outside.
How we handle concrete cutting, from the first line to cleanup
The first thing I ask is the shape of the opening, because a straight cut and a round hole take different tools. Then we mark the lines on the concrete with you, plan around any scan we've agreed on, and make sure our crew can reach water and power close by, since our saws run wet. We make the cuts, break out and haul the pieces if that's in your estimate, and pick up the slurry before we leave.
Cutting is often the first half of a bigger job. When a sunken section comes out, we can pour it back as part of concrete driveway building, and an old slab cut away to make room for something bigger leads straight into concrete patio construction. Either way, I'd put the budget into the subgrade, the dirt and base the new concrete sits on, before the finish, because a nice surface on loose fill settles just like the old one did.
Saw cutting for straight lines
This suits a driveway panel coming out, a trench for a pipe under a floor or a doorway in a wall, anywhere the opening has straight sides. Slabs get a flat saw, and walls where a floor saw can't work get a track-mounted diamond saw.
Core drilling for round holes
This suits a pipe, drain, conduit or utility line that has to pass through a slab or wall, because a diamond core bit cuts a clean round hole sized to it. It's the right call when you only need a hole, not a whole section out.
Get a written concrete cutting estimate
Send the form and we'll reply within one business day to set a free on-site estimate, with no obligation. Rather talk? Call (214) 429-3296.
Call (214) 429-3296Why Mesquite homeowners call Frontier Mesquite Concrete Company for cutting
The owner measures every job
I started this business in Mesquite in 2023 after years building schedules for a busy concrete company and then working on its crews. I still come out to measure and write each estimate myself, so your questions go straight to the person planning the cut.
Fully licensed and insured, every cut
We're fully licensed and insured. That counts on cutting work, because nobody sees what's inside a slab or wall until the blade is in it.
Curb cuts done the city's way
Where a driveway meets a Mesquite street with curb and gutter, a city ordinance has the curb and gutter removed back to the nearest construction joint, a planned seam in the concrete, so that's where the cut at the curb lands. The copy of that rule may be older than later changes, so we check the current version with the city before we mark the line.
On a cutting job, the plan matters more than the saw, so send us the details or call (214) 429-3296 and I'll come take a look.
What happens when you call us about concrete cutting in Mesquite?
Call or send your request
Tell us where the slab or wall is and what you need cut, by phone or through the form. We get back to you and set a time for me to come out.
I measure and walk it
I measure, ask how you'll use the space and tell you plainly what I'd do. Then I send a written estimate that shows what's in it and what isn't, so you know what you're paying for before you sign.
We prep, cut and clean
Once you say go, I set the date and line up the permit side, any inspection and the scan if we planned one, and if the opening gets poured back, I book the concrete truck only when the prep is done. Then our crew makes the cuts and leaves the area cleaned up.
Common questions
How much does concrete cutting cost per foot in Mesquite?
Across the US, concrete slab saw cutting usually costs about $4 to $15 per linear foot of cut, and that's for the sawing alone. Where your job lands in that range depends on the slab or wall and the size of the job, as covered above. Your written estimate gives the number for yours.
Do I need a permit to cut concrete in Mesquite, TX?
Ask Mesquite's Building Inspection Division, which requires and issues construction permits, because its residential list names concrete regulations and foundation repair but doesn't name cutting. The city's permit steps also ask homeowners and contractors to apply for a Professional License, with a copy of the required state license or a picture ID. We check this before we set a date, and when a permit is required, we handle it.
Should a concrete slab be scanned before cutting or coring?
Usually, yes. One scanning company advises a professional scan before any drilling, coring or cutting, because drawings and what you can see on top help but don't prove the spot is clear. Its guide also has owners pull the latest structural drawings and mark out the whole work area first, and we talk through scanning with you at the estimate so it's planned in, not added on cut day.
Does concrete cutting include breaking out and hauling the concrete away?
Not always, because sawing and removal are separate jobs, and a cutter may cut the lines and leave the panels in place. Breaking, hauling and disposal can cost more than the sawing itself, so ask what every quote includes. Ours says in writing whether we're only sawing or also breaking out and hauling the pieces.
What is the best way to keep dust down when cutting concrete?
Cut wet. Federal job-site safety rules pair walk-behind saws with a built-in system that feeds water to the blade the whole time, so it's fair to ask any crew how its saws stay wet. The trade-off is slurry, water carrying cement fines, which one tool seller's guide says stays out of drains on most sites and needs containment, vacuum pickup and an agreed place to dispose of it.
How do I get underground utilities marked before digging under a cut slab in Texas?
You request a free locate from Texas811 through its online portal or by calling 811. The request asks how deep the digging goes and whether the area is white-marked, painted to show where digging is planned. It matters when a cut leads to digging, because Texas law counts powered trenching, boring or digging that disturbs soil 16 or more inches deep as excavating.
Book your concrete cutting estimate today
Call (214) 429-3296, email projects@mesquiteconcretecompany.com or use the form with the slab or wall location, the cuts you need and whether you want the pieces hauled off, and I can plan the visit around it.