Frontier Mesquite Concrete CompanyFrontier Mesquite Concrete Company

Concrete pool decks in Mesquite TX - a deck that drains and grips when wet

Water sitting by the pool, cracks across the deck or concrete too hot for bare feet? We pour decks that drain and grip.

A freeform swimming pool is surrounded by pale concrete pool decking inside a screened backyard enclosure.
  • Fully licensed and insured.
  • Free in-person estimates.
  • We respond within 1 business day.

What does a new concrete pool deck take, from tear-out to finish?

A concrete pool deck is the slab around your pool where everyone walks barefoot, and in Mesquite, TX, we build it to slope water away, grip when it's wet and stay easier on your feet. The job often comes with tearing out an old deck, new steps from the back door or a slab for a pool house, and the pour itself is the quick part once the ground and forms are ready.

Most calls start with an old deck that holds puddles, cracks near the pool edge or gets too hot to cross, or with a new pool that needs a deck around it. A deck should be graded so water doesn't sit in low spots, because standing water turns slick, stains the surface and keeps you cleaning. The price moves with the size and shape of the deck, whether an old one has to come out, how much work the ground needs before we pour and the finish and color you pick. The schedule turns on the weather, the permit side and, on a new pool, when the pool builder is done, and the written estimate after my visit shows what's in your price and what isn't.

How do you know your pool deck needs work?

  • Puddles that won't drain

    If water still sits in the same spots long after everyone's out of the pool, the deck usually has low spots or a slope running the wrong way. The longer it goes, the more water soaks into the ground under the slab and softens what's holding it up.

  • A section sinking or tilting

    When one slab drops below the next one or pulls away from the pool edge, the ground under it has usually settled or shifted. That lip is a toe-stubber for barefoot kids, and the gap lets even more water get underneath.

  • Cracks and a flaking top

    Random cracks across the middle of a slab, or a top that chips and turns dusty, usually point to joints cut late or a pour done in the midday heat. Those cracks let water in and tend to grow with each wet and dry spell, so patching often just buys time.

  • Concrete steps construction

    If your back door sits higher than the deck, new steps poured to meet it give you a safe, even way down to the pool.

  • Slab foundation building

    A pool house, cabana or outdoor kitchen near the water needs a slab of its own, and planning it with the deck keeps the two levels lined up.

How we build your concrete pool deck

We start by digging out the old deck or loose dirt and packing the subgrade, which is the ground the slab sits on, because a deck only stays as flat as what's under it. On a new pool, I want to know how the ground around the shell was filled and packed down, since fill that wasn't placed and compacted right can settle later and crack the deck. We set the forms so the deck slopes away from the pool and the house and water runs off instead of sitting, tie in the rebar, the steel that holds the slab together, and help you pick a finish and color that grips when wet and stays easier on bare feet. We pour early, before the afternoon heat can dry out the top, finish the surface, cut the joints on time and let the slab cure, which is the wait while it hardens, before chairs and foot traffic go back on it. If the budget gets tight, I'll trim the finish before I trim the base, because nobody sees the base on day one but everybody sees it once it settles.

A deck usually ties into other work around the yard. If the back door sits above the deck, we pour concrete steps to meet it at the right height, and if you're adding a pool house or outdoor kitchen, our slab foundation work gives it a base that lines up with the deck.

  • Broom finish

    We drag a broom across the fresh concrete to leave fine ridges your feet can grip, which suits a family deck that needs to be simple to clean and safe to cross. It's the plainest look and usually the lower-cost choice.

  • Stamped or textured finish

    If you want the deck to look like stone or slate, stamped concrete presses a pattern into the surface, and we keep enough texture in it to grip when wet. It suits owners who want the deck to match the house, and it costs more and takes more upkeep than a broom finish.

Get a written estimate for your pool deck

Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free with no obligation, and calling (214) 429-3296 works too.

Call (214) 429-3296

Why Mesquite homeowners call Frontier Mesquite Concrete Company for pool decks

  • I walk every deck myself

    I come out to look at the pool and the yard and write the estimate myself, and I run pour day while our crew digs, forms, pours and finishes. The person who priced your deck is the one making the calls on site.

  • Ground, forms, steel ready first

    We're known for having the ground, forms and steel ready before the concrete truck pulls up, and we've worked that way since we opened in 2023. Concrete won't wait once it's in the forms, so a crew still setting up ends up rushing the finish on your deck.

  • A base built for clay

    The Blackland Prairie, from north of Dallas down to San Antonio, has clay soils that shrink and swell a lot as their moisture changes. Around a pool, where splash-out and rain keep that moisture shifting, digging out and packing the base is where we spend our time.

  • Fully licensed and insured

    We're fully licensed and insured, so you're not carrying the risk of an uninsured crew working around your pool. We stand behind the deck with a simple promise, satisfaction guaranteed.

On a pool deck, the slope and the ground underneath decide most of what you'll live with later, so that's where I start. Set up a visit and I'll walk the deck with you.

What happens after you call about a pool deck in Mesquite?

  1. Call or send a request

    Call (214) 429-3296 or send the form, and we'll set a time for me to come out and walk the deck with you.

  2. I measure and write it up

    I measure, ask how you use the pool area and tell you plainly what I'd do, then send a written estimate that shows what's in it and what isn't. You'll know what you're paying for, from tear-out to finish, before you sign.

  3. Line up permit and inspection

    Once you say go, I set the date, check with the city or county on what your deck needs and handle the permit when one is required. Mesquite inspects all permitted work against its codes and the approved plans, so I build the inspection into the schedule and book the truck only when the prep is done.

  4. Pour, finish and cure

    Our crew pours, finishes and cuts the joints while I run the day, and we clean up before we leave. Then the deck needs its cure time before furniture goes back out, and we'll tell you when it's ready.

Common questions

  • How much does a concrete pool deck cost in Mesquite, TX?

    A concrete pool deck in the Dallas area usually costs about $6 to $12 per square foot. Tearing out an old deck, extra ground prep and a stamped or decorative finish push a job toward the top of that range, while a plain broom finish on solid ground sits lower. I measure on site and send a written estimate with your own figure.

  • How do I keep a concrete pool deck from getting too hot?

    Pick a lighter color, because darker decorative finishes can get very hot in direct sun, right where everyone's barefoot. Settle the color early, since it's a comfort choice separate from how thick the slab is. On a new pour, one type of cement cool deck topping is splashed onto the fresh concrete the same day, and on a deck that's already in place, a spray-applied cool deck coating can go over the existing slab.

  • What causes cracks in a concrete pool deck, and how do you prevent them?

    Drying is the usual cause, because concrete shrinks as it dries. Control joints, the straight grooves cut into the slab, make planned weak lines so those cracks are more likely to form there, and agreeing on the joint plan before the pour sets where they're most likely to show. Since the deck and the pool shell move differently, isolation joints, a flexible break between them, can also help keep the deck from pushing against the pool, its edge stones or other fixed parts.

  • Who can pull a building permit in Mesquite, TX?

    In Mesquite, only a licensed contractor, or a homeowner who owns, lives in and homesteads the house through the Dallas Central Appraisal District, can get a building permit. A contractor needs a professional license with the city first, and permits are obtained through the city's Citizen Self Service. Questions on what to submit go to the city's Building Inspection Division at 972-216-6212, and setback or zoning questions go to the Planning Department at 972-216-6216.

  • What is the best sealer for a concrete pool deck?

    A penetrating sealer usually keeps more grip than a film-forming one, which matters on a wet deck. Grit mixed into a film sealer for traction wears off and has to be added again every time the deck is resealed. Ask what type of sealer is going on before it's applied, because it changes how slick the deck gets and what upkeep you're signing up for.

  • Is a smooth or polished concrete pool deck too slippery?

    It can be, because a pool deck should grip when it's wet, and a highly polished surface usually isn't suitable unless it's part of a designed non-slip system. If you like the smooth look, ask whether it comes as part of that kind of system before you commit to it. A broom or textured finish is the simpler way to get grip underfoot.

Start your Mesquite pool deck estimate

When you call (214) 429-3296 or send the form, tell us whether the pool is new or existing, about how big a deck you want and the color you have in mind, so I come out ready to talk about your deck.

(214) 429-3296Request a quote