Concrete floor installation in Mesquite TX - a slab built for what goes on top
Cracked, uneven or chipping floor? We dig out, pack the base and pour a level slab built for the flooring you plan.
- Fully licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
What does installing a new concrete floor involve, from the base to the finish?
Concrete floor installation in Mesquite is the whole job of building a new slab floor. We dig out and pack the ground, set the forms and steel, pour, and trowel the top smooth. You end up with a level, solid floor for a shop, an addition, a barn or a room. The job often comes with new steps at the door or a deck outside.
Most people call us because they're adding on, finishing out a shop or replacing a floor that's cracked and uneven. The price mostly comes down to the size, how thick the slab is, whether it needs steel, what the ground underneath needs and what flooring goes on top. The schedule turns on prep and paperwork, because before we set a date we check with the city or county over your property on what the job needs, and when a permit is required we handle it and fit the inspection in. My written estimate spells out what's in your price, so you see it before you sign.
How do you know it's time for a new concrete floor?
Cracks that keep spreading
A hairline crack is normal, but cracks that widen or break the slab into pieces usually mean the ground under it moved. Wait too long and the pieces drift apart, and any tile or wood on top cracks with them.
One side sinking or uneven
If a ball rolls to one corner or the floor dips near a wall, the slab has usually settled because the base under it was never packed. It won't level itself, and the low spot gets worse once water finds it.
A dusty, chipping top
A surface that powders or flakes when you sweep it usually points to a weak top from a rushed pour or one done in midday heat. It wears fast under traffic, and flooring or coatings don't hold well on it.
Often paired with a new floor
Concrete steps construction
A raised floor can leave a drop at the doorway, and poured steps with even risers make that entry easy and safe to use every day.
Concrete pool decks
If the room opens toward your pool, a deck with a textured surface around the water handles wet, bare feet far better than a smooth floor.
How we do concrete floor installation
First I ask what's going on top of the floor and how you'll use it, because carpet, tile or wood changes what we build underneath. Then our crew digs out the soft dirt and packs the subgrade, the ground the slab sits on, so the floor doesn't settle along with it. We set the forms and the rebar, steel bars that help the slab carry weight and hold cracks tight. We pour in the cooler part of the day so the top doesn't come out weak, then trowel it and cut control joints early. Those are shallow grooves that give any cracking a straight line we picked. The base is the part you'll never see, and it's the first thing people want to cut to save money. I'd rather spend your budget there than on a fancy finish over a slab that moves.
The floor often isn't the only concrete on the job. A floor that sits above the yard usually needs concrete steps at the door. If the room opens onto a pool, pouring a concrete pool deck in the same stretch of work keeps the levels and the look tied together.
Smooth troweled finish
Repeated passes with a steel trowel leave a smooth, tight floor that sweeps clean, which suits a shop, garage or room that stays dry. It gets slippery when wet, so it's a poor fit for a bare floor near a door or a hose.
Broom or textured finish
Dragging a broom across the fresh concrete leaves fine ridges that grip underfoot. It suits a bare floor that may get wet, like a barn, wash area or back entry, where footing matters more than a polished look.
Slab built for a floor covering
If carpet, tile or wood is going on top, we build moisture protection under the slab so water rising from the ground doesn't ruin the flooring. It suits an addition or a finished room, so settle on the covering before we pour.
Reinforced or plain slab
Steel in the slab costs more per square foot than a plain pad, but it helps a floor carry heavier loads and hold cracks tight on shifting clay. A light-use pad may not need it, and I'll tell you which fits your floor.
Get a written estimate for your new concrete floor
Send the form and we'll reply within one business day to set a time. I come out, walk the job and send a free written estimate, with no obligation. Calling (214) 429-3296 works too.
Call (214) 429-3296Why Mesquite homeowners call Frontier Mesquite Concrete Company for new floors
I walk the job myself
I come out, measure and write your estimate, and I'm the one running the pour when the truck shows up. You deal with the same person from the first look to the finished floor.
Ground and steel ready first
Since I started the business in Mesquite in 2023, we've been known for having the ground, forms and steel set before the concrete truck pulls up. Concrete starts setting once it arrives, so a crew still prepping on pour day costs you a better floor.
Fully licensed and insured
The City of Mesquite requires a professional license before anyone can pull a building permit. We're fully licensed and insured, so the permit side of your floor doesn't land on you.
On a floor, the ground and the moisture protection under it matter most, because neither is easy to fix once the slab is down. When you're ready, tell us about your floor and I'll set a time to come out.
What happens after you call about a new floor in Mesquite?
Call or send a request
Call (214) 429-3296 or fill out the form, and we'll get back to you. We'll set a time for me to walk the job with you.
I measure and write it up
I come out, measure, ask how you'll use the floor and tell you plainly what I'd do. Then I send a written estimate that shows what's in the price and what isn't, so you know what you're paying for before you sign.
We prep and pass inspection
Once you say go, I set the date, line up materials and the permit, and book the truck only after the base, forms and steel are done. When a permit applies, the work has to stay open and exposed until the city's building inspectors approve it, so that inspection fits in before we pour.
Pour, finish and cure
I run pour day while our crew places the concrete, trowels it and cuts the joints, and we clean up before we leave. Then we tell you when the slab is ready for foot traffic and when it can take heavier loads.
Common questions
What does a concrete floor cost near Mesquite, TX?
A new concrete slab in the Dallas area usually costs about $4 to $11 per square foot, before any staining or stamping. Commercial and industrial floors run thicker than a home floor and cost more. Reinforced concrete also costs more per square foot than a plain pad. Your written estimate shows what's included for your floor.
How long does a new concrete floor take before I can walk on it?
You can usually walk on a new slab within 48 hours. Wait about a week before moving heavy loads onto it. Concrete takes 28 to 30 days to fully cure, the slow hardening that gives it its strength. I'll tell you on pour day what that means for your floor.
Who issues building permits for concrete work in Mesquite?
The city's Building Inspection Division issues construction permits for homes and businesses, and it inspects both new and remodel work. For a permit question about your property, call the city at 972-216-6212 or check its permit process page. We check what your floor needs before we set a date.
Can a homeowner pull a permit for a concrete floor in Mesquite?
Only if you own the home, live in it and have it homesteaded through the Dallas Central Appraisal District. Otherwise a licensed contractor has to get the permit through the city's online permit system. When your job needs a permit, we take care of it.
Why does clay soil matter for a concrete slab in the Mesquite area?
Much of the Blackland Prairie, from north of Dallas down to San Antonio, sits on Houston Black clay. That clay shrinks and swells a lot as it dries out and gets wet. Building on it often cracks, so builders often treat it with hydrated lime and reinforce foundations with steel rod. Not every lot has it, and we see what's under yours once we dig, which is why the base gets our time first.
What causes the edges of a new concrete slab to curl at the joints?
Curling happens when the slab dries unevenly and the edges at the joints shift, and it's a normal part of concrete losing moisture. It can make laying some flooring harder in the months after the pour. Ask us about timing before your flooring installer comes in.
Plan your new concrete floor with us
Call (214) 429-3296 or use the form with the floor size, the flooring you plan to put down and the property address handy, so I can check the permit side and plan the base before I come out.