Frontier Mesquite Concrete CompanyFrontier Mesquite Concrete Company

Concrete Contractor in Seagoville, TX - Driveways and Patios Built on a Packed Base

Frontier Mesquite Concrete Company is a concrete contractor based in Mesquite that builds driveways, patios, pool decks and slabs in Seagoville, TX. We dig out and pack the base, set forms and steel, then pour and finish.

A freeform swimming pool is surrounded by pale concrete pool decking inside a screened backyard enclosure.
  • Fully licensed and insured.
  • Free in-person estimates.
  • We respond within 1 business day.

Homes and back lots across Seagoville

Seagoville is a smaller city a short drive southeast of our base in Mesquite, and most of our calls here come from homeowners. A lot of the houses sit on roomy lots. Some are older, with their original driveways and patios, and some are on newer streets, and plenty have space out back for a shop or a storage building. People show us the same things we see next door in Balch Springs: driveways that have cracked or dropped at one end, patios that hold water against the house, and bare ground that needs a slab.

On an older lot, the old concrete comes out first, and what it was sitting on tells me how much base work the new slab needs. On a roomy lot, reach matters too, because a back-yard patio or a long drive changes how the concrete gets from the truck to the forms.

What a Seagoville job involves before the truck shows up

Permits here come from the city's Building Inspection Department. Its permits cover building work and other property improvements, and the city processes contractor registration along with the permit application. Before we set a date, I check with the city on what your job needs. When a permit is required, we handle it and build the inspection into the schedule, because that's the one step our crew can't speed up. We're fully licensed and insured.

The schedule turns on that permit check, the weather on pour day and the cure, the days a new slab needs to harden before it carries weight. The price moves with the size and thickness of the slab, how much old concrete we break out, how much digging and packing the base needs, the finish you pick and how far the truck has to reach. Your own figure comes from the written estimate after I've walked the job. We come down from Mesquite for this work the same way we cover Heartland and Forney, and wherever the job is, I book the truck only after the forms and steel are set, because concrete starts setting once it's mixed.

Get a written estimate for your Seagoville concrete job

Send the form or call (214) 429-3296, and we'll get back to you within one business day. I come out to your Seagoville property myself, measure and walk the job with you, then send a written estimate that shows what's included. The estimate is free, and you're under no obligation.

Call (214) 429-3296

Services in Seagoville, TX

  • Concrete driveway building

    Older driveways often crack and sink once the dirt under them settles. We tear out the old slab, dig and pack a new base, and pour on top of it.

  • Concrete patio construction

    Roomy back yards leave room for a bigger patio, and older patios here often hold water against the house. We slope the new slab so water runs away.

  • Concrete pool decks

    Pool decks take bare feet and constant splash, so the surface and the drainage both matter. We pour concrete pool decks with a broom finish, a light dragged texture that gives wet feet grip.

  • Slab foundation building

    Plenty of lots here have room for a shop or storage building, and it needs a slab first. We form it, set the steel and pour it level.

  • Concrete retaining walls

    Where a yard steps down, a retaining wall holds the dirt back from a patio or driveway. We build it with drainage behind it so water doesn't push it over.

  • Concrete sidewalk building

    Walks on older lots often heave or break at the seams and turn into trip spots. We replace the whole run and cut joints where cracks should go.

What happens after you call us about a Seagoville job

  1. Call or send a request

    Tell us what you've got and where the house is, and we set a time for me to come out. It helps if you're home so we can walk it together.

  2. I measure and walk it

    I measure, ask how you'll use the concrete and tell you plainly what I'd do. My written estimate shows what's in it and what isn't, so you know what you're paying for before you sign.

  3. We set the date

    Once you say go, I set the date and line up materials, the permit side and the inspection. If the job needs an inspection, it goes on the schedule ahead of the pour.

  4. Our crew preps and pours

    Our crew digs out, packs the base and sets forms and steel, and I book the truck only when that prep is done. I run pour day, and then the slab cures before it takes weight.

Common questions

  • Do I need a permit for a concrete driveway or patio in Seagoville?

    The city's permit guidance doesn't list driveways or patios by name, so we check your job with the city before we set a date. According to the city, cosmetic work like painting, carpet, cabinets and trim needs no permit, but its permits also cover other property improvements. If you'd like to ask yourself, the city says to call its building inspections line at 972-287-6829 when it's unclear.

  • Does a retaining wall or storage building need a permit in Seagoville?

    Yes. The city's permit FAQ says every retaining wall needs a permit, and a wall over 48 inches tall also needs engineered plans. It says any accessory or storage building needs a permit too, so if we're pouring the slab for a shed or shop, the building's permit is part of the plan.

  • What building codes does Seagoville use for concrete work?

    Seagoville currently uses the International Code Council family of codes with its own city amendments, and it enforces both city and state codes on construction, repair and demolition. A council agenda also listed the residential code for one- and two-family homes, with amendments, for consideration. When a job needs a permit, we plan it to those rules from the start.

  • How much does a new concrete driveway cost in Seagoville?

    I can't give you a fair price until I've measured your driveway, so your figure comes from the written estimate. When a budget's tight, the base is usually the first thing people want to cut, and it's the one place I won't, because it's buried on day one and it's what keeps the slab from settling later. If you need to save, a plain broom finish costs less than stamped or decorative work.

  • What causes concrete driveways to crack, and will a new one crack like the old one?

    Most cracks we break out come from the prep, not the concrete: a base raked level instead of dug out and packed, water running under the slab, or joints cut late or skipped. We pack the subgrade, the dirt the slab sits on, slope the slab away from the house and set rebar, the steel that holds the pieces together. We also cut control joints, shallow grooves that give the slab a planned line to crack along, so a hairline crack in a joint means the slab is doing what it should.

  • How long does it take before I can drive on a new concrete driveway?

    You can walk on a new slab well before you can drive on it, because concrete keeps gaining strength for days while it cures. I'll give you the wait for your slab at the estimate, so you can plan where the cars go in the meantime.

Plan your Seagoville concrete job with us

Call (214) 429-3296 or send the form now, because the permit check and the truck both have to line up before we can give you a pour date.

(214) 429-3296Request a quote